DC是把HDL描述的电路综合为跟工艺相关的、门级电路。并且根据用户的设计要求，在时序和面积，时序和功耗上取得最佳的效果。在floor planning和placement和插入时钟树后 返回DC进行时序验证。其最高版本被称为DC Ultra。在Synopsys软件中完整的综合方案的核心是DC UltraTM，对所有设计而言它也是最好级别的综合平台。DC Ultra添加了全面的 数据通路和时序优化技术，并通过工业界的反复证明。

 第一阶段

       综合的定义；ASIC design flow；Synopsys Design Compiler的介绍；Tcl/Tk 功能介绍；Synopsys technology library；Logic synthesis的过程；Synthesis 和layout的接口——LTL；Post_layout optimization；SDF文件的生成；其他高级综合技巧与总结。
　　Overview?
　　
　　 This course covers the ASIC synthesis flow using Design Compiler -- from reading in an RTL design (Verilog and VHDL) to generating a final gate-level netlist. You will learn how to read in your design file(s), specify your libraries, constrain a complex design for area and timing, partition your design? hierarchy for synthesis, apply synthesis techniques to achieve area and timing closure, analyze the synthesis results, and generate output data that works with downstream layout tools. You will verify the logic equivalence of synthesis transformations (such as Datapath optimizations and Register Retiming) to that of an RTL design using Formality. The course includes labs to reinforce and practice key topics discussed in lecture. All the covered commands and flows are printed separately in a 4-page Job Aid which the student can refer to back at work.
　　
　　 Objectives?
　　
　　 At the end of this workshop the student should be able to:?
　　 ◆Create a setup file to specify the libraries that will be used?
　　 ◆Read in a hierarchical design?
　　 ◆Partition a design's hierarchy optimally for synthesis?
　　 ◆Constrain a complex design for area and timing, taking into account different environmental attributes such as output loading, input drive strength, process, voltage and temperature variations, as well as post-layout effects such as clock skew and net parasitics?
　　 ◆Select the appropriate compile flow for your project?
　　 ◆Execute the recommended synthesis techniques within each compile flow to achieve area and timing closure?
　　 ◆Perform test-ready synthesis when appropriate?
　　 ◆Verify the logic equivalence of a synthesized netlist to that of an RTL design?
　　 ◆Write DC-Tcl scripts to constrain and compile designs?
　　 ◆Generate and interpret timing, constraints and other debugging reports?
　　 ◆Understand the effect that RTL coding style can have on synthesis results?
　　 ◆Generate output data (netlist, timing/area constraints, physical constraints scan-def) that works with downstream physical design?or?layout tools?
　　
　　 Audience Profile
　　
　　 ASIC digital designers who are going to use Design Compiler to synthesize Verilog?or?VHDL RTL modules to generate gate-level netlists.
　　
　　 Prerequisites
　　
　　 To benefit the most from the material presented in this workshop, you should:
　　 ◆Understand the functionality of digital sequential and combinational logic?
　　 ◆Have familiarity with UNIX and a UNIX text editor of your choice?
　　 ◆No prior Design Compiler knowledge?or?experience is needed?
　　
　　第二阶段
　　
　　 Unit 1
　　 ◆Introduction to Synthesis
　　 ◆Setting Up and Saving Designs
　　 ◆Design and Library Objects
　　 ◆Area and Timing Constraints
　　 ◆Setting Up and Saving Designs

• Loading Technology and Design Data
• Design and Library Objects
• Timing Constraints

　　 Unit 2
　　 ◆Partitioning for Synthesis
　　 ◆Environmental Attributes
　　 ◆Compile Commands
　　 ◆Timing Analysis
　　 ◆More Constraint Considerations
　　

• Compiling RTL to Gates
• Timing Analysis

Unit 3
◆More Constraint Considerations
◆Multi-Clock Designs
◆Synthesis techniques and Flows
◆Post-Synthesis Output Data
◆Conclusion
Congestion Analysis and Optimization

Unit 4

Unit 5

Clock Tree Synthesis

Multi Scenario Optimization

?

Unit 6

Design Planning

Routing and Crosstalk

Chip Finishing and DFM

Customer Suppor

第三阶段

第一部分
unit 1. Introduction to Synthesis
? Execute the basic steps of synthesis on a simple design
? Use two commands to modify the partitioning of a design
? Gain familiarity with SolvNet ,your essential resource for?
　　solving your design compiler problems
unit 2. Setup, Libraries and Objects
unit 3. Partitioning for Synthesis
unit 4. DC Tcl - An Introduction

第二部分
unit 5. Timing and Area
?Constrain simple designs for area, timing and design
　　rule constraints (DRC)
? Generate ,view and analyze timing and DRC reports
unit 6. Environmental Attributes
unit 7. Design Rules and Min Timing
unit 8.Timing Analysis

第三部分
unit 9.Multiple Clock/Cycle Designs
? Constrain and analyze multi-clock,
　　asynchronous and multi-cycle path designs
? State several key steps that occur during a default compile?
? Enable Design Compiler to work harder in fixing design violations
? Describe some issues that surround synthesis and where to find additional information?

unit 10. Optimization

unit 11.Compile Strategies

unit 12. Before,During and After　

        从事ASIC 设计与验证的工程师，希望更深入了解Design Compiler和芯片综合（chip synthesis）技术的工程师，希望从事ASIC设计工程师的理工科背景大四学生或硕士研究生。

        学员学习本课程应具备下列基础知识：
        ◆ 对数字集成电路设计有一定理解；
        ◆ 了解Verilog/VHDL 语言。